home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir39
/
drdtips.zip
/
1408.TXT
< prev
next >
Wrap
Text File
|
1992-04-01
|
4KB
|
94 lines
Document 1408
COMSPEC MAPPING ON NOVELL NETWORK
Description:
LOGIN SCRIPT FOR SYSTEM WITH BOTH COMPAQ DOS 3.31 AND DR DOS 6.0
When setting up a Novell NetWare Network Server machine, it is
normal for a Network Administrator to actually create a
directory structure on the server's hard drive which contains
all the various DOS operating system files for all the various
DOS operating systems being used by network's DOS clients. This
is often done to accommodate clients to the server who do not
have their own hard drive. That is, such clients can use the
server to access their DOS files and programs instead of their
local floppy drive.
For instance, a network server serving five clients using two
different operating systems, say MS DOS 3.30 and COMPAQ DOS
3.31, will have two directories which contain all the operating
system files contained in the clients' DOS directories. These
directories might have paths on the server like
SYS:PUBLIC/MSDOS/V3.30 and SYS:PUBLIC/COMPAQ/V3.31.
When a client running MS DOS 3.30 attaches to the server and
logs in to this environment, it is important that the client's
DOS PATH and COMSPEC variables be adjusted to "point" (or MAP)
to the server's copy of the client's DOS files. This is
normally accomplished by the Network Administrator who makes
some changes and adjustments to one of the server's files called
the System Login Script. This Login Script is the NetWare
Operating System's DOS operating system batch file equivalent.
Using a few basic commands in this System Login Script, the
Network Administrator can determine which DOS operating system
the server client is currently using and then map that client in
the right direction.
If a user is using DR DOS as the client operating system on a
Novell Network, it may not be immediately apparent as to how a
DR DOS client can be properly identified and mapped from within
the System Login Script.
Normally, a line like MAP INS S2:=SYS:PUBLIC/%OS/%OS_VERSION in
the System Login Script will handle the mapping properly. When
DR DOS is the DOS client's operating system, however, the %OS
and %OS_VERSION variables actually return MS DOS and v3.31
respectively. It is obvious how this can cause confusion. The
DR DOS operating system is most compatible with MS DOS/COMPAQ
DOS version 3.3X. It is for this reason that DR DOS appears to
the NetWare operating system to be MS DOS 3.31. As a result,
both COMPAQ DOS 3.31 and DR DOS versions 5.0 and 6.0 will end up
being mapped to the same sub-directory on the NetWare server's
hard drive.
In order to prevent such conflicts, a little extra work is
required when writing the System Login Script. Because the DR
DOS client operating system actually maintains two environment
variables called OS and VER which equal DRDOS and 5.0 or 6.0
respectively, it is actually possible to test the DOS client
operating system in the System Login Script to determine if the
DOS client is running COMPAQ DOS 3.31, DR DOS 5.0 or DR DOS 6.0.
Once the DR DOS client is detected, the Login Script should map
SYS:PUBLIC/%MACHINE/DRDOS/5.0 or SYS:PUBLIC/%MACHINE/DRDOS/6.0
This sample System Login Script explains and implements such a
technique:
REM These lines establish environment variables OS and VER
REM if the DOS client is NOT running DR DOS (any version.)
REM That is, any DOS client operating system other that
REM DR DOS does not already maintain the environment
REM variables OS and VER, and as a result,
REM they need to be set.
IF <OS> != "DRDOS" AND <OS> != "DRMDOS" THEN BEGIN
DOS SET OS="%OS"
DOS SET VER="%OS_VERSION"
END
REM All that's left to be done is to map the DOS client using
REM the DOS environment variables <OS> and <VER>.
MAP INS S2:=%FILE_SERVER/SYS:PUBLIC/%MACHINE/%<OS>/%<VER>
COMSPEC=S2:COMMAND.COM
The above script would result in the following:
Compaq DOS 3.31's map would be: SYS:PUBLIC\PC_DOS\MSDOS\3.31\
DR DOS 6.0's map would be: SYS:PUBLIC\PC_DOS\DRDOS\6.0\
DR Multiuser DOS's map would be: SYS:PUBLIC\PC_DOS\DRMDOS\5.0\